Das XL500 Forum

Da mein ursprüngliches Signalrelais kaputt war, habe ich mir eines dieser günstigen Relais gekauft. https://www.ebay.co.uk/itm/334298289040 Dann trennte ich das Kunststoffgehäuse und lötete die winzige Platine darin (ca. 1 cm x 1 cm) aus. Vergessen Sie nicht, zu kennzeichnen, welche der beiden Löche...

Danke für die Antwort, Gunnar. Ich werde es mit der Plexiglas-Methode versuchen, da ich es bereits mit einem Akku-Bohrschrauber umgedreht habe und keine unordentlichen Spritzer entstanden sind. Alles, was ich sehen konnte, war, dass etwas Öl in der Mulde unter der Nockenwelle austrat.

Ich muss prüfen, ob ausreichend Öl die Nockenwelle erreicht.

Wenn ich bei laufendem Motor eine Stößelabdeckung entferne, spritzt das Öl dann überall hin, oder kann man einfach sehen, wie es ohne Schmutz zugeführt wird?

some more....

from manual.

I see you have bought the inlet rocker arm from Italy that was auctioned on eBay recently. There is a new exhaust one for sale on UK eBay, but it's quite expensive. https://www.ebay.co.uk/itm/225402591077 I've purchased several things from the seller before using WhatsApp to negotiate a slightly che...

He has a lot of amazing skill and equipment, but he didn't show how the 90 degree angle between cam lobes was set along with the correct alignment of the cam sprocket.

However, it was interesting to watch, as were the other 2 clips about the cylinder head.

no, it's not me.

I just stumbled onto a few YouTube clips and thought they might be of interest to others.

https://www.youtube.com/watch?v=B0DArmiXlPM

https://www.youtube.com/watch?v=yPGRBkwf-uE

https://www.youtube.com/watch?v=lGfqWwKSq3Q

https://www.youtube.com/watch?v=xoxKKjjAkSY

https://www.youtube.com/watch?v=ryP1GwMv2Kk

https://www.youtube.com/watch?v=KJELWiVcf7I

My harness is finally finished. I used the old boots as they cleaned up like new. It ended up costing far more than I expected, but way less than on ebay and I have the tools as a bonus. https://www.ebay.co.uk/itm/334066652423 TOOLS: 1) IWS-0560B Ratchet Terminal Crimping Tool. Used for adding addit...

I used 'All Balls' bearings. I also purchased a piece of steel tubing from Ebay for £6 to use as a tool. It slide over the steering stem with a bit of wiggle room and was slightly longer than the stem length (I can get the exact measurements if you want). I did mine in the summer. I put the stem in ...

Belated Christmas greetings due to being away.
Thanks everyone for your help in 2022, and wishing you all a happy new year.