Die Suche ergab 212 Treffer
- 13. Dezember 2022, 09:57
- Forum: Dies und Das
- Thema: locking fuel cap for XL500R
- Antworten: 2
- Zugriffe: 248
Re: locking fuel cap for XL500R
sorry, I haven't explained it very well. The link above is the wrong cap. However, If you ask the seller (or sellers on your ebay) for the same make but part number 749536, you will get the correct locking cap for the XL500R. :-D :-D :-D :-D :-D It fits perfectly and has a breather pipe connection.
- 8. Dezember 2022, 17:35
- Forum: Dies und Das
- Thema: locking fuel cap for XL500R
- Antworten: 2
- Zugriffe: 248
locking fuel cap for XL500R
WARNING-DO NOT BUY THE LOCKING FUEL CAP IN THE LINK!!! https://www.ebay.co.uk/itm/115611443219 I bought it for £11.50 with free postage, but it's too small. However, I sent the diameter of the original cap to the seller (57mm) and he posted a replacement cap which fits perfectly (part number 749536)...
- 8. November 2022, 16:45
- Forum: Reparatur
- Thema: building your own Wiring harness/loom
- Antworten: 3
- Zugriffe: 319
Re: building your own Wiring harness/loom
I contacted Sklia on the post above, and he used 1mm cross sectional cable with no problems so far. I also contacted the person on ebay who sells new XL500R harnesses, and he replied with the following: 1. Wire cross sectional area in square mm is- 2.00mm 2. Outside diameter of wire & insulation...
- 7. November 2022, 19:41
- Forum: Dies und Das
- Thema: Update
- Antworten: 3
- Zugriffe: 307
Re: Update
Here's one, but too expensive in my opinion.
https://www.ebay.co.uk/itm/334066652423
I'll be making a post soon showing a simple guide of how I do mine with a shopping list of parts and prices.
https://www.ebay.co.uk/itm/334066652423
I'll be making a post soon showing a simple guide of how I do mine with a shopping list of parts and prices.
- 7. November 2022, 14:50
- Forum: Dies und Das
- Thema: Update
- Antworten: 3
- Zugriffe: 307
Re: Update
Looks like mine.
I'm having wiring problems too at the moment.
I started repairing the faults but decided to just make a whole new wiring loom instead.
I'm having wiring problems too at the moment.
I started repairing the faults but decided to just make a whole new wiring loom instead.
- 24. Oktober 2022, 00:21
- Forum: Reparatur
- Thema: building your own Wiring harness/loom
- Antworten: 3
- Zugriffe: 319
Re: building your own Wiring harness/loom
thanks. I'll post the final details and guide (with pictures) once it's finished.
- 23. Oktober 2022, 20:02
- Forum: Reparatur
- Thema: building your own Wiring harness/loom
- Antworten: 3
- Zugriffe: 319
building your own Wiring harness/loom
My XL500R had electrical problems. Firstly, the rear brake light would only work when the hand lever was pulled, but not whilst using the foot pedal. I traced this to a faulty wire inside the loom. If it was bent back and forth, the light went on/off. After mending that, I tried to tackle a faulty i...
- 23. Oktober 2022, 19:42
- Forum: Reparatur
- Thema: Ölkanal zur Nockenwelle Leckage
- Antworten: 13
- Zugriffe: 692
Re: Ölkanal zur Nockenwelle Leckage
I had 2 pairs of crankcases. The sleeves on both were loose enough to slide out by hand. But I thought it was meant to be like this so as to allow the linkless timing chain to be removed?
- 10. Oktober 2022, 16:45
- Forum: Reparatur
- Thema: 2l Öl nicht 1,5l nach dem Umbau?
- Antworten: 7
- Zugriffe: 588
Re: 2l Öl nicht 1,5l nach dem Umbau?
Sorry, I have just noticed that you are referring to an XL250.
I should have mentioned that mine is a XL500R
I should have mentioned that mine is a XL500R
- 23. August 2022, 23:41
- Forum: Dies und Das
- Thema: Verwendung Rahmenhalterungen
- Antworten: 1
- Zugriffe: 231
Re: Verwendung Rahmenhalterungen
nothing was attached to them on mine.
- 7. August 2022, 09:10
- Forum: Reparatur
- Thema: Klappergeräusch Motor
- Antworten: 491
- Zugriffe: 38922
Re: Klappergeräusch Motor
I had a similar job to do on my build. Here is the link.....
viewtopic.php?f=2&t=14648&p=126088#p126088
I used helicoil because tests showed it was the strongest and came in the different lengths needed.
viewtopic.php?f=2&t=14648&p=126088#p126088
I used helicoil because tests showed it was the strongest and came in the different lengths needed.
- 26. Juli 2022, 00:05
- Forum: Reparatur
- Thema: Komprimierung testen
- Antworten: 4
- Zugriffe: 361
Re: Komprimierung testen
Gute Nachrichten! Ich habe die Dekompressionskabel richtig eingestellt und jetzt ist die Kompression genau so, wie sie sein sollte. Wahrscheinlich zu viel, um mit meinen dünnen Beinen anzufangen.
- 25. Juli 2022, 00:12
- Forum: Reparatur
- Thema: Komprimierung testen
- Antworten: 4
- Zugriffe: 361
Re: Komprimierung testen
Thanks Gunnar. I haven't had a chance to do any more on my bike as very busy at the moment. However, I had a concern after reading a recent post where others members talked of how hard there bikes were to kick over. Mine is quite easy, yet it has a new rebore and new genuine Honda piston and rings. ...
- 23. Juli 2022, 18:17
- Forum: Reparatur
- Thema: Komprimierung testen
- Antworten: 4
- Zugriffe: 361
Komprimierung testen
weiß jemand, wie man die Kompression auf einem XL500R richtig testet?
Welche Lektüre sollte ich bekommen?
Welche Lektüre sollte ich bekommen?
- 19. Juli 2022, 15:26
- Forum: Dies und Das
- Thema: Reifenfreigaben
- Antworten: 40
- Zugriffe: 6323
Re: Reifenfreigaben
vehicles of 40+ years in the UK are exempt from an MOT or annual road tax.
The owner/rider is trusted by the government to make sure that it is roadworthy and legal.
It's strange but you actually want to do it when you're not forced to.
The owner/rider is trusted by the government to make sure that it is roadworthy and legal.
It's strange but you actually want to do it when you're not forced to.