Has anyone ever tried making a copper head gasket for the XL500?
It would be reusable by annealing so can come off again and again.
The original gasket would need a sheet 160mmX160mm.
The 5 x metal gasket is exactly 1.26mm thick, but the standard gasket is 1.6mm.
It seems to only come in 1.2 or 1.5mm. What thickness copper do you think I should order?
Would there need to be a specific grade of copper (C106/101)?
https://www.youtube.com/watch?v=ZZvDnOMf8C0
copper head gasket
Hier kann über alles Mögliche geplaudert werden was mit und um unsere XL zu tun hat
Moderator: Kristian
Antworten
1 Beitrag
• Seite 1 von 1
Gehe zu
- Topics
- ↳ Datenschutzerklärung
- ↳ die neusten Änderungen auf den XL500 Seiten
- ↳ letzten 20 Beiträge im Forum
- Forum allgemein
- ↳ News / Aktuelles
- ↳ Tipps und Tricks
- ↳ FAQ
- ↳ Spenderforum
- XL 500
- ↳ Dies und Das
- ↳ Tuning
- ↳ best of Schraubertipps
- ↳ Reparatur
- ↳ Baustelle
- ↳ tools for rent
- ↳ Umfragen
- ↳ Stammtisch Hamburg
- ↳ Oldie-Sport
- ↳ XL Treffen 2024
- ↳ XL Treffen 2023
- ↳ XL Treffen 2022
- ↳ XL Treffen 2021
- ↳ Aktuelles zum Treffen 2020
- ↳ Aktuelles zum Treffen 2019
- ↳ XL Treffen 2018
- ↳ Aktuelles zu Treffen 2016
- ↳ Aktuelles zum Treffen 2017
- ↳ aktuelles zu XL Treffen in 2015
- ↳ Aktuelles zum Treffen 2014
- ↳ Aktuelles zum Treffen 2013
- ↳ Aktuelles zum Treffen 2012
- ↳ Aktuelles zum Treffen 2011
- ↳ Aktuelles zum Treffen 2009
- ↳ Aktuelles zum Treffen 2010
- ↳ wichtige und interessante Adressen
- ↳ international
- ↳ XL-Links
- ↳ Literaturecke
- ↳ Reisebereich
- ↳ XL-Videos
- XL 500 Kleinanzeigen
- ↳ ich suche:
- ↳ zu verkaufen
- ↳ tausche
- ↳ Zu verschenken
- ↳ bei ebay
- ↳ Krümmerforum
- Sonderforum
- ↳ XL / XR gestohlen